Grandstream GXV3175 User Manual - Manual (Page 71)

FIRMWARE VERSION 1.0.3.76 GXV3175 USER MANUAL Page 71 of 139
Figure 43: BLF Widget on Home Screen
To configure BLF, users will need to access the BLF through the “MENU”  “BLF” (Figure 42). After
entering the BLF screen, press the button at the top right. Figure 44 shows the BLF settings screen.
Figure 44: BLF Settings Screen
To create individual BLFs make sure that “BLF List” is selected at the top and click “Add”. When selecting
“Key Mode” there are two options, Speed Dial and BLF. For “Account” the user can select an account
that is registered to one of the three lines on the GXV3175. Keep in mind that the BLF that is being
created should be on the same SIP server as the account selected under the “Account” field. The “Name”
is simply an identifier label on the BLF list. The “UserID” is the extension that will be monitored. When
done, click “OK”. The new BLF should be added to the BLF list at the left (Figure 44).
The second option of creating BLFs would be using an Eventlist (must be created in SIP server first). To
access Event- List BLF, access the same BLF settings screen, and select the “URI” tab at the top