Grandstream GXV3175 User Manual - Manual (Page 21)

FIRMWARE VERSION 1.0.3.76 GXV3175 USER MANUAL Page 21 of 139
Figure 10: Quick Setup Guide Completion
MAKING THE FIRST CALL WITH IPVIDEOTALK SERVICE
GXV3175 offers users the ability to send and receive free lifetime video calling to other
GXV3175/GXV3140 on the IPVideoTalk network. Once the GXV3175 is connected, video calls can be
made using Grandstream’s configuration peer-to-peer SIP technology and IPVideoTalk service. To place
the first video call, complete the following three simple steps:
1. Connect the handset, network cable and power adapter to the GXV3175 using the methods
described above. After the phone boots up and obtains an IP address through DHCP, it will
attempt to register to the IPVideoTalk network. When the user boots the phone for the first time,
Account 1 will be registered to the IPVideoTalk server with a provisioned extension number
810xxxx.
2. If the registration is successful, the “IPVideoTalk” text on the LCD will turn green and an assigned
IPVideoTalk number (810xxxx) specific to this phone will be displayed. At this point, the phone is
ready for making and receiving video calls over the IPVideoTalk network.
3. Tap on the account (See Figure 11) in the touch screen then the dial pad will show up for on-hook
dialing. Dial the number of any other phone registered on the IPVideoTalk network and press
“Video Call” or “Audio Call” button in the dial pad. If the user has purchased more
GXV3175/GXV3140 IP Multimedia phones, these phones are able to establish video calls
between each other and the user will immediately experience the plug and play nature of the
GXV3175.