Grandstream GXV3175 User Manual - Manual (Page 28)

FIRMWARE VERSION 1.0.3.76 GXV3175 USER MANUAL Page 28 of 139
Item Definition
1
Line/Account selection. Three independent SIP accounts may be configured, and the Line options
can be used to choose the line/account for audio/video call.
2 Account option. Dropdown list will show all the registered account for selection.
3 Call option. Dropdown list will show three types of call: Call, Paging and IP Call for direct IP Cal.
4 Audio output. Three types of audio output are available: speaker, handset and headset.
5
Call volume. Press to turn down or press to turn up the volume.
6 Standard keypad.
7 Delete input number. Press to delete the input number when dialing out.
8 Contacts. Press to open contact list.
9 Call History. Press to open call history.
10 Message. Press to open message box.
11 Voice Mail. Press to access voice mail box.
12 BLF. Press to access BLF.
GXV3175 supports up to 3 independent SIP accounts. Each account may have separate SIP servers,
usernames and NAT configurations. The registered account will display in the idle screen by default. When
the phone is off-hook, users could press Line1/Line 2/Line 3 or the account option in the dial pad shown in
Figure 19 to switch between different SIP accounts.
Incoming calls through the three accounts will try to use the corresponding line. If this line is busy, the
green icon for the corresponding line will become red. When a call comes in and the line is busy, the next
idle line will be used.
HANDSET, SPEAKER AND HEADSET MODE
GXV3175 allows users to switch among handset, speaker or headset by pressing corresponding icons
shown in Dial Pad (Table 6, Item 5). If headset is plugged in, the headset icon will be activated for users to
select.