GAI-Tronics ICP9000 Navigator Series Console Operator's Manual - Manual (Page 66)

Console Diagnostics ICP9000 Navigator Series Console Operator’s Manual
12/10 66
User Parameters Menu
The User Parameters menu is shown below.
USER PARAMETERS
1) SIDE TONE VOLUME ADJUST
2) MIC SELECTION/SENSITIVITY
3) PRINTER ERROR
<1–3> TO SELECT TO EXIT
Figure 32. User Parameter Menu
Side Tone Volume Adjust
Side tone is the tone as heard by the operator during tone generation. There are several tones generated
by the Navigator that can be lowered when using a headset to reduce ear fatigue. These tones include
error beeps, paging tones, alert tones and talk-prohibit tones.
When the operator elects to adjust the side tone volume, the console displays the current volume and the
instructions on the display as shown below. To adjust the side tone volume, use the
SCROLL Up/Down
buttons to the right of the information window. A beep is generated as the volume is adjusted to allow
the volume to be set to a comfortable level. When the level is correct, press the
MODE key to exit.
USER PARAMETERS
1) SIDE TONE VOLUME ADJUST 5
2) MIC SELECTION/SENSITIVITY
3) PRINTER ERROR
TO EXIT
Figure 33. Side Tone Volume Adjust