GAI-Tronics ICP9000 Navigator Series Console Operator's Manual - Manual (Page 43)

ICP9000 Navigator Series Console Operator’s Manual Standard Feature Operation
43 12/10
Auto-Base Station Override
Use the CARD Suite software application to enable or disable the auto-base station override. If this
option is enabled, while in quick-select paging, the console operator can override the preprogrammed
transmit channel for an alias using the channel
SELECT buttons. Unless the operator is very familiar
with the way the console uses paging channels and selected channels, allowing override of the auto-base
station select is not recommended.
If this option is disabled while in quick-select paging, the console automatically selects the paging
channel and the channel
SELECT buttons are inoperative. This ensures that the proper channel is
ALWAYS selected when using an alias to page.
Exiting Paging Mode
Press the PAGE button again to exit paging mode.