GAI-Tronics ICP9000 Navigator Series Console Installation and Service Manual - Manual (Page 65)

ICP9000 Navigator Installation and Service Manual Features and Options
61 12/10
The Navigator supports the printing or logging of RapidCall traffic. Upon receipt of any call type and for
clearing of Emergency Alerts, a printer log entry is made. Using CARD Suite, the printing of each type
of call, incoming and outgoing, can be enabled and disabled.
RapidCall signaling may be transmitted on a selected channel or on a CARD Suite-assigned channel.
Note that PTT-ID transmissions may be enabled or disabled on each channel and PTT-ID transmissions
occur on any channel in which PTT-ID transmission is enabled.
RapidCall Buttons
Call Alert
When the C ALL A LERT button is pressed, the Signaling window changes to what is shown below.
Figure 33.
The second line of the information window flashes “*CALL ALERT*.” The right side of this line shows
either the ID displayed on the top line of the queue, “UNIT _ _ _ _” or the last ID used. Refer to Figure
34 below.
MOTOROLA PL-A TRANSMIT
*CALL ALERT* UNIT _ _ _ _
1/2 UNIT 0339 0339 CALL ALERT 11:04A
2/2 UNIT 0339 0339 CALL ALERT 11:04A
<0-9/*/#> TO ENTER ID
TO SELECT ALIAS
Figure 34. Call Alert Display