Sip settings page – GAI-Tronics VoIP Basic Programming Guide User Manual
Page 6
Pub. 42004-481B
VoIP Telephone Basic Programming Guide
Page 5 of 28
f:\standard ioms - current release\42004 instr. manuals\42004-481b.doc
10/13
SIP Settings Page
The SIP Settings page is used to view or change parameters specific to the SIP signaling protocol. GAI-
Tronics VoIP telephones can hold details of up to four SIP proxies. If the telephone is unable to register
or make a call, it can roll over to the next in a prioritized sequence.
There is a SIP Info page for each of the four possible endpoints, and a General SIP Info page containing
details common to them all. The four endpoint pages are sub-pages of the General page, which is shown
in Figure 2 below.
For basic configurations, allow the SIP General Proxy parameters on the General SIP Info page to remain
at default.
Figure 2. General SIP Info Page