GAI-Tronics VoIP Basic Programming Guide - Manual (Page 21)

Pub. 42004-481B
VoIP Telephone Basic Programming Guide Page 20 of 28
f:\standard ioms - current release\42004 instr. manuals\42004-481b.doc
10/13
Table 9. Audio Settings Parameters for Basic VoIP Telephone Configuration
Parameter Function
HANDSETVOLUME If the telephone is a handset model, this parameter sets the handset earpiece
volume. The range is 1–9.
N
OTE : If the telephone is a hands-free model, this setting has no effect.
HANDSFREEVOLUME
If the telephone is a hands-free model, this parameter sets the speaker
volume. The range is 1–12.
N
OTE : If the telephone is a handset model, this setting has no effect.
HANDSETGAIN If the telephone is a handset model, this parameter sets the handset
microphone gain. The range is 1–8.
N
OTE : If the telephone is a hands-free model, this setting has no effect.
HANDSFREEGAIN If the telephone is a hands-free model, this parameter sets the microphone
gain. The range is 1–8.
N
OTE : If the telephone is a handset model, this setting has no effect.
Next, under the Signals & Audio heading, click on the Multicast Settings link to navigate to the
Multicast Settings page or the Logic Settings page. Accessing both pages may be required, depending on
desired operation.