GAI-Tronics VoIP Basic Programming Guide - Manual (Page 5)

Pub. 42004-481B
VoIP Telephone Basic Programming Guide Page 4 of 28
f:\standard ioms - current release\42004 instr. manuals\42004-481b.doc
10/13
Table 1. IP Setting Parameters needed for Basic Configuration
Parameter Function
DHCP Enables or disables the use of DHCP for the assignment of IP parameters. If this
value is set to OFF the telephone will use the Static IP values.
Values available:
ON or OFF Default value: OFF
ADDRESS
Sets the static IP Address of the unit.
Default value:
192.168.1.2 Do not enter a value here if DHCP is set to ON .
MASK Sets the static sub-net mask.
Default value:
255.255.0.0 Do not enter a value here if DHCP is set to ON .
GATEWAY Sets the static default gateway address. Default value: 0.0.0.0
DNS1 Sets the IP address of the primary static DNS server. If DHCP is enabled then this
DNS server will not be used. Default value:
0.0.0.0
DNS2 Sets the IP address of the secondary static DNS server for redundancy. If DHCP is
enabled then this DNS server will not be used.
Default value: 0.0.0.0
LOCALDOMAIN Sets the domain name of the telephone on the network, as used by DNS.
May be assigned by DHCP.
WEB Enables or disables access to the web server. Values available: ON or OFF Default
value: ON
STUN Sets the IP address or URL for the STUN server that will be used to resolve STUN
requests. Leaving this field blank will disable the STUN facility.
Default value:
blank
Next, under the Network heading, click on the link for SIP Settings link to navigate to the SIP Settings
page.