GAI-Tronics VoIP Basic Programming Guide - Manual (Page 17)

Pub. 42004-481B
VoIP Telephone Basic Programming Guide Page 16 of 28
f:\standard ioms - current release\42004 instr. manuals\42004-481b.doc
10/13
Click the Edit button to begin making changes. Click the Apply & Save button to save your changes
when complete.
Table 7.
Parameter Function
LIST Each list can contain up to 20 memory entries, separated by commas.
For example, if you wanted the MEM1 button to call the memory 1 (usually a
telephone number or address), if that failed to then call memory 5, and if that failed
call memory 10, you would enter “1, 5, 10” in the List box for List 1.
When a memory list in invoked, the telephone will attempt to place a call to each
memory in the list in sequence until a call is successful or it reaches the end of the
list.
Each memory can appear in more than one list.
WAKEANDDIAL
When set to ON, the telephone will come off hook and start to process the list as
soon as the appropriate button is pressed. This is factory set for hands-free
telephones, but can be set for handset telephones if required.
Next, click on the Basic Info link to navigate to the Basic Info sub-page.