FSR DV-MFSW-94 - Manual (Page 19)

19
6.14 Input or Output Timing Status
STAT id TI input<cr>
STAT id TO output<cr>
TI Input Timing, TO Output Timing
Where:
id
2 byte unit ID
input 1,2,3,4,5,6,7,8,9 or A for all
output 1,2,3,4 or A
Example:
Get Unit 01 all output timing status.
STAT 01 TO A
<cr>
Response:
STAT O1=01,O2=01,O3=02,O4=01
Get Unit 01 input 1 timing status.
STAT 01 TI 1
<cr>
Response:
STAT I1=01
Values:
01 - represents 720x480p
02 - 720x576p
03 - 1280x720p 50Hz
04 - 1280x720p 60Hz
05 - 1920x1080i 50Hz
06 - 1920x1080i 60Hz
07 - 1920x1080p 50Hz
08 - 1920x1080p 60Hz
09 - 800x600 60Hz
10 - 800x600 75Hz
11 - 1024x768 60Hz
12 - 1024x768 75Hz
13 - 1024x768 85Hz
14 - 1280x1024 60Hz
15 - 1280x1024 75Hz
16 - 1280x1024 85Hz
17 - 1600x1200 60Hz
18 - 1360x768 75Hz
19 - 1366x768 85Hz
20 - 1440x1050 60Hz
21 - 1900x1200 60Hz
6.15 RS232 Settings
Gets the RS232 settings of the port
STAT
id RS<cr>
id 2 byte unit ID
Example:
Get Unit 01 RS232 settings.
STAT 01 RS
<cr>
Response:
STAT B115200, D8, None