FSR DV-MFSW-94 - Manual (Page 14)

14
6.2 Set HDMI Audio Output command
Tells the unit which audio source to use for which output.
HAU
id output audiosource [“;” output audiosource]<cr>
Where:
HAU
HDMI Audio Output Command
id 2 byte unit ID
output Output number 1-4,
audiosource 2 byte audio source 00 = Source audio, 01 = Balance 1 Audio, 02 = Balance 2
Audio, 03 = Output Audio Off (Mute)
Delimiter separating additional definitions
<cr> Carriage Return (0Dhex)
Example:
Set Unit 01 Output 1 to Balance 1 Audio and Output 2 to Output Audio On.
HAU 01 1 01; 2 04
<cr>
6.3 Set HDMI EDID
Tells the unit which timing scheme to use.
HEDID
id output setting[“;” output setting]<cr>
HEDID HDMI EDID command
id
2 byte unit ID
output OUTPUT number 1 – 4
setting 00 - AUTO(EDID READ from display)
01 - represents 720x480p
02 - 720x576p
03 - 1280x720p 50Hz
04 - 1280x720p 60Hz,
05 - 1920x1080i 50Hz
06 - 1920x1080i 60Hz
07 - 1920x1080p 50Hz
08 - 1920x1080p 60Hz
09 - 800x600 60Hz
10 - 800x600 75Hz
11 - 1024x768 60Hz
12 - 1024x768 75Hz
13 - 1024x768 85Hz
14 - 1280x1024 60Hz
15 - 1280x1024 75Hz
16 - 1280x1024 85Hz
17 - 1600x1200 60Hz
18 - 1360x768 75Hz
19 - 1366x768 85Hz
20 - 1440x1050 60Hz
21 - 1900x1200 60Hz
“;” Delimiter separating additional definitions
<cr>
Carriage Return (0Dhex)
Example:
Set Unit 01 Output 1 EDID to Auto, Output 2 to 1280x1024 85Hz.
HEDID 01 1 00; 2 16
<cr>