FSR DV-MFSW-94 - Manual (Page 11)

11
10. RS232C CONFIG SETUP
 Select menu using Left / Right buttons.
 Select data using up / down buttons.
 Press enter to save.
11. LAN CONFIG
 Select menu using UP/Down buttons.
 Press enter to get into detail set up.
 Set up using Left / Right buttons.
 Change the set up using up / down button.
 Press enter to save.
12. INPUT EDID DATA SET
 Select menu using Left / Right buttons.
 Select input channel and EDID data using up / down
buttons.
 Press Enter to save.
13. INFO
 Select channel to review the information using Left / Right
buttons.
- RS232C CONFIG SET -
[ Baudrate: 57600_ ]
[ Data Bit: 8 ]
[ Parity: None ]
→1.LOCAL IP
2.GATEWAY IP
3.SUBNET MASK
4.MAC ADDRESS
-GATEWAY ADDRESS -
[ 192.168. 0. 1 ]
[ ]
[ Set & Save:Enter ]
-LOCAL IP ADDRESS -
[ 192.168. 0. 2 ]
[ ]
[ Set & Save:Enter ]
- SUBNET MASK -
[ 255.255.255. 0 ]
[ ]
[ Set & Save:Enter ]
- MAC ADDRESS -
[00.08.DC.00.01.00]
[ ]
[ Set & Save:Enter ]
- INPUT EDID SETUP -
[ Input:1 HDMI/DVI ]
[ EDID: 16 ]
[ HD1080p (2CH) ]
- INPUT1 INFO VIEW -
[IN1:HDMI,Ext-SPDIF]
[TIM: NO SIGNAL ]
[DVI MODE HDCP OFF]