FSR DV-MFSW-94 - Manual (Page 17)

17
6.9 Set IP Address
Sets the IP address of the DV-MFSW-94.
IPADR
id type addr<cr>
Where:
IPADR IP address command
id
2 byte unit ID
type P = IP address, S = Subnet, G = gateway, M = MAC address
addr address for IP address, Subnet, Gateway XXX.XXX.XXX.XXX where XXX = 000 – 255, for
MAC address xx.xx.xx.xx.xx.xx where xx = 00 – FF.
<cr> Carriage Return (0Dhex)
Example
Set Unit 01 IP parameters.
IPADR 01 P 192.168.001.010
IPADR 01 S 255.255.255.000
IPADR 01 G 192.168.001.001
IPADR 01 M 00.AB.CD.EF.80.01
6.10 Get Universal Status Command
Gets the status of the unit
STAT
id type<cr>
id 2 byte unit ID
Where type is:
OC Output
connections
IA Input Assignment
AO Audio Output
TO Output Timing
TI Input Timing
RS RS232 Setting
LN LAN Setting
6.11 Get Output Connection Status
OC
STAT id OC
output<cr>
Where:
id
2 byte unit ID
output 1,2,3,4 or A for all
Example:
Get Unit 01 all output connection status.
STAT 01 OC A
Response:
STAT O1=I1, O2=I2, O3=I3, O4=I4