Foxconn X38A User Manual

Page 41

Chapter 3 BIOS Description

4. PCI/PNP Resource Management

PCI/PNP Resource Management Menu

Clear NVRAM

This sets the operating mode of the boot block area of the BIOS FLASH ROM
to allow programming in the Yes setting.

Plug & Play O/S

Set this value to allow the system to modify the settings for plug and play
operating system support.

[No]: The setting is for operating systems that do not meet the plug and play

specifications. It allows the BIOS to configure all the devices in the system.

[Yes]: The setting allows the operating system to change the inerrupt, I/O, and

DMA setting. Set this vaule if the system is running plug and play aware oper-

ating system.

PCI Latency Timer

Set this value to allow the PCI latency timer to be adjusted. This item sets the
latency of all PCI devices on the PCI bus.

Allocate IRQ to PCI VGA

Set this item to allow or restrict the system from giving the VGA adaper card an
interrupt address.

Palette Snooping

Whether to allow the systme to modify the palette snooping settings.

PCI IDE BusMaster

Set this value to allow or prevent the use of PCI IDE busmastering.

OffBoard PCI/ISA IDE Card

This item is used to allow the offboard PCI / ISA IDE card to be selected.

PDF 文件使用 "pdfFactory" 试用版本创建