Foxconn X38A User Manual
Page 36
30
Chapter 3 BIOS Description
v
Serial Port2 Mode
This item is used to set the serial Port2 mode.The available setting values
are: [Normal], [IrDA 1.6us] and [IrDA 3/16 bit].
v
IR Duplex Mode
Select full or half duplex mode for serial port 2.
v
IRTX Pin Select
This item allows BIOS to select transmit pin in normal condition or inverse the
IRTX.
v
IRRX Pin Select
This item allows BIOS to select receiver pin in normal condition or inverse the
IRRX.
v
IR TX to Rx Delay Select
Allows BIOS to select IR from Tx to Rx 4 characters time delay for serial port 2.
v
IR RX to Tx Delay Select
Allows BIOS to select IR from Rx to Tx 4 characters time delay for serial port 2.
2.4 AHCI Configuration
Scroll to this item and press
AHCI Configuration Menu
v
AHCI CD/DVD Boot Time out
This option is used to set AHCI CD / DVD boot time out.
v
AHCI Port0/ 1 / 2 / 3 / 4 / 5
While entering Setup, BIOS auto detects the presence of IDE devices. This
displays the status of auto detection of IDE devices.
PDF 文件使用 "pdfFactory" 试用版本创建