Foxconn X38A - Manual (Page 35)

29
Chapter 3 BIOS Description
USB Mass Storage Device Menu
v USB Mass Storage Reset Delay
Number of seconds POST waits for the USB mass storage device after start
unit command.
v Emulation Type
This item is used to select the type of emulation used during the boot sequence.
2.3 SuperIO Configuration
Scroll to this item and press to view the following screen:
SuperIO Configuration Menu
v OnBoard Floppy Controller
This item is used to enable or disable floppy controller.
v Serial Port1 / 2 Address
This item specifies the base I/O port address and interrupt request address
of serial port 1 / 2.
Note: Do not try to set the same values for serial ports 1 and 2.
PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.com.cn