Bios security features – Foxconn G45MG User Manual

Page 49

bIoS Security features

► Change Supervisor Password

This item is used to install or change supervisor password.
After you input Supervisor password, it then will ask you to input user password optionally.

► User Access Level

This item is used to set user access level.
The available settings are:
[No Access]: Prevent user access to the setup utility.
[View Only]: Allow access to the setup utility but the fields can not be changed.
[Limited]: Allow only limited fields to be changed, such as date and time.
[Full Access]: Allow any field to be changed except the supervisor password.

► Change User Password

This item is used to install or change user password.

► Clear User Password

This item will be displayed only when a User Password was set before. It is used to clear the
user password.

► Password Check

When it is set to [Setup], a password is required to enter the BIOS setup; select [Always], a
password is required not only to enter BIOS setup, but also on each boot of your PC.

► Boot Sector Virus Protection

This item is used to enable/disable boot sector virus protection.

BIOS Security Features

Scurity Settings

Help Item

Supervisor Password : Installed

Install or change the

User Password

: Installed

password.

Change Supervisor Password

[Press Enter]

User Access Level

[Full Access]

Change User Password

[Press Enter]

Clear User Password

[Press Enter]

Password Check

[Setup]

Boot Sector Virus Protection

[Disabled]

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F9:Optimized Defaults

[Press Enter]

Enter New Password :