Foxconn G45MG - Manual (Page 36)

3
29
Advanced BIOS Features
► CPU Configuration
Press to go to its submenu.
► Boot Device Priority
This option is used to select the priority for boot devices. After pressing , you can
select the device using the Up/Down arrow keys, and change the device priority using <+> or
<->; you can exit this menu by pressing .
► Hard Disk Drives
This option is used to specify the boot priority sequence from available hard disk drives.
► Removable Drives
This option is used to specify the boot priority sequence from available removable drives.
► CD/DVD Drives
This option is used to specify the boot priority sequence from available CD/DVD drives.
► Quick Boot
While Enabled, this option allows BIOS to skip certain tests while booting, this will shorten the
time needed to boot the system.
► Quiet Boot
This item is used to enable/disable the quiet boot.
[Disabled] : Displays the normal POST messages.
[Enabled] : Displays OEM customer logo instead of POST messages.
► Floppy Drive Seek
This item controls whether the BIOS will be checking for a floppy drive while booting up. If it
cannot detect one (either due to improper configuration or physical unavailability), it will appear
an error message. Disabling this function, then POST will not detect the floppy.
► Bootup Num-Lock
This item defines if the keyboard Num Lock key is active when your system is started. The
available settings are: On (default) and Off.
► BIOS Write Protect
To protect the system BIOS from virus attack, there is a BIOS write-protection mechanism
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Advanced BIOS Features
► CPU Configuration [Press Enter] Help Item
► Boot Device Priority [Press Enter]
► Hard Disk Drives [Press Enter] Configure CPU.
► Removable Drives [Press Enter]
► CD/DVD Drives [Press Enter]
Quick Boot [Enabled]
Quiet Boot [Enabled]
Floppy Drive Seek [Disabled]
Bootup Num-Lock [On]
BIOS Write Protect [Disabled]
Case Open Warning [Disabled]
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[Press Enter]