Foxconn Bloodrage - Manual (Page 60)

53
3
oC Gear
*************OC Gear**************
► Current Storage Gear
We have more spaces in CMOS to allow you to store up to 4 sets of BIOS configuration data.
You can change any setting of BIOS, including the overclocking information, and save the
whole BIOS settings to one of four storage area. Later, you can retrieve BIOS settings by
restore it. This item is used to choose storage section to store your BIOS settings. Setting
values: [Not Use It]; [Storage Gear 1 - 8].
► Current Storage Gear Name
This item will be avaliable when Current Storage Gear is set to [Storage Gear 1 - 8], then you
can select the overclock setting for the Current Storage Gear. Setting values: [No Assign Gear
Name]; [Still Tweaking]; [Max CPU]; [Max FSB]; [2d Benching]; [3d Benching]; [24/7 Over-
Clock]; [Tweaked Stock Speed].
► Store / Restore / Clear My Setting
This item allows you to Store/Restore/Clear the BIOS settings. See the help string in “Item
Help” table for detail.
********Foxconn Function********
► Software Item Selecting
When BIOS_SELECT jumper, which is on the motherboard, is set to 5-6 or 7-8, you can select
the power-on boot BIOS by this item. Its default is BIOS ROM 1.
► Smart Boot Menu
When PC starts, if [Enabled] is selected, a Boot Menu will be automatically displayed to inform
you to select a boot device. If no device is selected, the first device will be used. If [Disabled]
is selected, then PC will ask you to press [Esc] key to get into Boot Menu. This setting simpli-
fies multiple boot devices user from pressing [Esc] key to enter boot menu.
► Smart Power LED
Smart Power LED is a feature built on your motherboard to indicate different states during
Power On Self Test (POST). The LED is located at the front panel, and it displays POST state
by different long-short blinking intervals. You can always leave this state enabled.
Phoenix - AwardBIOS CMOS Setup Utility
OC Gear
*************** OC Gear *************** Item Help
Current Storage Gear Not Use It
x Current Storage Gear Name No Assign Gear Name Menu Level ►
x Store My Setting Store
x Restore My Setting Restore Choose storage section
x Clear My Setting Clear 1 or 2 or 3 or 4 or 5 or
or 7 or 8 to store your
********** Foxconn Function ********** clock setting. If you store
Software Item Selecting BIOS ROM 1 your setting to
Smart Boot Menu Disabled Current Storage Gear
Smart Power LED Enabled successfully, then the
Auto Detect PCI Clock Enabled Storage Gear will turn to
Spread Spectrum Enabled Green color.
If you clear the
Current Storage Gear
successful, then the
color will turn back
to normal.
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F7:Optimized Defaults
Not Use It