3 back panel connectors – Foxconn Bloodrage User Manual
Page 13
6
1
1-3 Back Panel Connectors
1. Ps/2 Keyboard Port
Use the lower port (purple) to connect a PS/2 keyboard.
2. UsB Ports
The USB port supports the USB 2.0/1.1 specification. Use this port for USB devices such as an
USB keyboard/mouse, USB printer, USB flash drive and etc.
3. Clear CMos Button
Onboard Clear CMOS button is located directly on the motherboard PCB, so you can easily clear
CMOS after failed overclocking attempts.
4. Coaxial s/PDIf out Connector
This connector provides digital audio out to an external audio system that supports digital coaxial
audio. Before using this feature, ensure that your audio system provides a coaxial digital audio in
connector.
■
Make sure the power supply is turned off before pressing the CLR_CMOS button to
clear CMOS.
■
Push down the CLR_CMOS button and hold it there for a couple of seconds to clear
the CMOS completely, then release.
CA
UT
IO
N
!
External SATA
Ports
USB Ports
LAN Ports
PS/2 Keyboard Port
Coaxial
S/PDIF Out
1394a Port
4
1
7
2
2
6
8
Audio Ports
Line Out
Microphone
Subwoofer
Rear Speaker
Side Speaker
Line In
3
5
USB Ports
Clear CMOS
Button