Foxconn Bloodrage - Manual (Page 114)

107
5
5-4 Install a New Windows XP
1. Press to enter BIOS Setup during POST.
2. Insert the Windows installation CD into the optical drive.
3. Set the “1st Boot Device” to “CDROM”, save changes and exit the BIOS setup.
4. The computer will reboot, and it will start installing Windows Operating System.
Watch the screen carefully, when the following picture appears, press key
immediately. If you forgot to do this, PC will go to an fatal blue screen, and you
may need to reboot the system again. PC may not respond to your input
immediately, and it keeps loading files until the next screen displays.
Windows Setup
Press F6 if you need to install a 3rd party SCSI or RAID driver.
W
hen you set the SATA Mode in BIOS to either AHCI or RAID, you need
to follow these steps to install your Windows XP system.
C
AU
TI
O
N
!
Phoenix - AwardBIOS CMOS Setup Utility
Advanced BIOS Features
► Removable Device Priority Press Enter Item Help
► Hard Disk Boot Priority Press Enter
First Boot Device Hard Disk Menu Level ►
Second Boot Device CD-ROM
Third Boot Device Removble
Boot Other Device Enabled
Boot Up NumLock Status On
Gate A20 Option Fast
Security Option Setup
APIC Mode Enabled
MPS Version Control for OS 1.4
OS Select for DRAM > 64MB Non-OS2
Report No FDD For WIN 95 No
Delay For HDD (Secs) 0
Full Screen Logo Show Enabled
Quantum Logo Show Enabled
Summary Screen Show Disabled
Debug Code Control LPC
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F7:Optimized Defaults
CD-ROM