Foxconn Bloodrage - Manual (Page 49)

42
3
Power-on function
► Wake-Up by PCI Card
This item is used to set the system to wake up by PCI card.
► USB KB/MS Wake-Up From S3
This item is used to set the system to wake up by USB KB/MS when it is in S3(Suspend to
RAM) mode.
► Power-On Function
This item allows you to use the keyboard or mouse to wake up the system from S3 mode. This
feature requires an ATX power supply. The setting values: [Password]; [Hot Key]; [Any Key];
[Button Only] and [Keyboard 98].
► KB Power-On Password
When "Power-On Function" is set to [Password], this item allows you to input a password to
wake up the system from S3 mode.
► Hot Key Power-On
When "Power-On Function" is set to [Hot Key], this item allows you to press a [Ctrl] + Function
key to wake up the system from S3 mode.
Phoenix - AwardBIOS CMOS Setup Utility
Power-On Function
Wake-Up by PCI Card Enabled Item Help
USB KB/MS Wake-Up From S3 Disabled
Power-On Function Button Only Menu Level ►
x KB Power-On Password Enter
x Hot Key Power-On Ctrl-F1
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F7:Optimized Defaults
Enabled