Foxconn Bloodrage User Manual
Page 35
This chapter explains how to change system settings
through the BIOS Setup menus. Detailed descriptions of
the BIOS parameters are also provided.
You have to run the Setup Program when the following
cases occur :
1. An error message appears on the screen during the
system Power On Self Test (POST) process.
2. You want to change the default CMOS settings.
This chapter includes the following information :
■ Enter BIOS Setup
■ Main Menu
■ Standard CMOS Features
■ Advanced BIOS Features
■ Advanced Chipset Features
■ Integrated Peripherals
■ Power Management Setup
■ PnP/PCI Configurations
■ PC Health Status
■ Quantum BIOS
■ Board Information
■ Load Optimized Defaults
■ Set Supervisor Password
■ Set User Password
■ Save & Exit Setup
■ Exit Without Saving
Since the BIOS will be updated in future, the BIOS information described in this
manual is for reference only. We can not guarantee that the content of this manual
to remain 100% consistent with the latest released BIOS at any given time in the
future. Please visit our support website for updated manuals or contact our techni-
cal support if you have any questions.