Foxconn Bloodrage - Manual (Page 14)

7
1
5. 1394a Port
This port is used to connect a 1394a device.
6. external sATA Port
To connect external SATA device(s) to your system by expanding the internal SATA port(s) to the
chassis back panel. External SATA device shall provide power by its own.
7. RJ-45 lAN Port
Each Gigabit Ethernet LAN port provides Internet connection at up to 1Gb/s data rate.
Both Gigabit Ethernet LAN ports can be combined in teaming mode to support connection speeds
up to 2Gb/s!
8. Audio Ports (soNAR X-fi Card)
For the definition of each audio port, please refer to the table below :
Note: The SONAR X-Fi card is in the package, you can connect it to the back panel.
Port 2-channel 4-channel 5.1-channel 7.1-channel
Blue Line In Line In Line In Line In
Green Line Out Front Speaker Out Front Speaker Out Front Speaker Out
Pink Microphone In Microphone In Microphone In Microphone In
Orange - - Center/Subwoofer Out Center/Subwoofer Out
Black - Rear Speaker Out Rear Speaker Out Rear Speaker Out
Grey - - - Side Speaker Out
LAN Type
Left: Active Right: Link
Status Description Status Description
1000M
Off No Link Off No Link
Green
Blinking
Data
Activity
Off 10 Mb/s Connection
Green 100 Mb/s Connection
Orange 1000 Mb/s Connection
Active
LED
Link
LED