Floppy disk drive connector : floppy1, Ide connector : pide1, Pin atx 12 v power connector : pwr1 – Foxconn Bloodrage User Manual
Page 24
17
2
floppy Disk Drive Connector : floPPY1
This motherboard includes a standard floppy disk
drive(FDD) connector, supporting 360KB, 720KB,
1.2MB, 1.44MB, and 2.88MB FDDs.
IDe Connector : PIDe1
With the provided Ultra DMA IDE ribbon cable, you
can connect to any IDE type of hard disk and CD/
DVD ROM/RW drive.
We recommend you using an 8-pin ATX 12V power supply. If
you are using a 4-pin power supply, you need to align the ATX
power connector according to the picture on the right.
CA
UT
IO
N
!
8-pin ATX 12 V Power Connector : PWR1
The 8-pin ATX 12V power supply connects to PWR1 and provides power to the CPU.
Pin #
Definition
Pin #
Definition
1
GND
5
+12V
2
GND
6
+12V
3
GND
7
+12V
4
GND
8
+12V
1
4
5
8
PWR1
GND
+12V
Connect a 4-pin
power plug
This manual is related to the following products: