Foxconn Bloodrage - Manual (Page 119)

112
5
2. Copy section 5-2, BIOS Configuration.
Shut down the computer, connect SATA hard disks to SATA ports, power on
computer again.
Press key, get into BIOS, set "SATA Mode" to [RAID], press to save
and exit BIOS. PC will reboot.
3. Copy section 5-3, Create RAID in BIOS.
Press simultaneously to get into RAID BIOS set up (Intel ® Matrix
Storage Manager option ROM utility).
Configure your new hard disks to RAID0, 1, 5 or 10. Exit RAID BIOS. PC will reboot.
4. The Windows XP is running again and a new hardware of RAID disk was found.
Click [Cancel] to skip this Wizard.
Click to exit.
Phoenix - AwardBIOS CMOS Setup Utility
OnChip IDE Device
SATA Mode RAID Item Help
Legacy Mode Support Disabled
x Turbo Memory Support Disabled Menu Level ►
OnBoard IDE and eSATA Chip IDE Mode
OnBoard SAS Chip Enabled
↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F7:Optimized Defaults
RAID