Foxconn C51XEM2AA-8EKRS2H User Manual

Page 78

Chapter 5 Directions for Bundled Software

Follow the next couple of screens to complete Deleting the Array.

As shown in Figure 7, the array has been deleted and we see only free disks.

Figure 7. RAID Array deleted

Setting Up a Spare RAID Disk

You can designate a hard drive to be used as a spare drive for a RAID 1, RAID 0+1
or RAID 5 array2. The spare drive can take over for a failed disk. MediaShield RAID
supports two types of spare drives:

Free Disk
A free disk is a disk that is not part of any RAID array, but can be used by any
available RAID 1, RAID 0+1, or RAID 5 array that requires a particular disk when
one of its disks crashes or becomes unusable. The process is automatic and
doesn’t require any userinteraction.

Dedicated Disk
A dedicated free disk is a disk that is assigned to a RAID 1, RAID 0+1, or RAID 5
array and that disk is used by that array only when needed, for example during a
system crash where a RAID mirrored drive is broken. The dedicated disk can be
used only by the array that it is assigned to and not by any other array.

Note: You must have at least two RAID arrays to use this feature.

PDF 文件使用 "pdfFactory" 试用版本创建