Foxconn C51XEM2AA-8EKRS2H - Manual (Page 42)

Chapter 3 BIOS Description
35
v CKE base power down mode
Enable or disable CKE base power down mode.
v CKE power down control
CKE power down mode selection. It should be set to “per channel” for non
mobile systems.
v Memclock tri-stating
Memclock tri-stating during C3 and Alt VID.
v Memory Hole remapping
Enable or disable memory hole remapping.
v Auto Optimize Bottom IO
Auto optimize maximum DRAM size when kernel assigns PCI resources
done.
Memory Timings menu
Standard Memory Settings
v Timing mode
Select automatic or manual set memory timing.
v tCL (CAS Latency)
CAS Latency (CAS# to read data valid).
v tRCD
RAS# to CAS# delay for a RD/WR command to the same bank.
v tRP
Row Precharge time Precharge-to-Active or Auto-Refresh of the same bank.
PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.com.cn