Foxconn C51XEM2AA-8EKRS2H - Manual (Page 20)

Chapter 2 Installation Instructions
13
5.Push down the retention bracket lock on the retention mechanism to secure
the heatsink and fan to module base.
6. Connect the fan’s power cable to the appropriate 3-pin terminal on the
motherboard.
4.Align the other end of the reten-
tion bracket to fasten the cooling
set on the top of the retention
mechanism. 3. Place the cooling set onto the re-
tention mechanism. Attach one end
of the retention bracket to retention
mechanism.
PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.com.cn