Foxconn C51XEM2AA-8EKRS2H - Manual (Page 48)

Chapter 3 BIOS Description
41
PnP/PCI Configurations
PnP/PCI Configurations Menu
v Init Display First
This option is used to set which display device will be used first when your PC
starts up.
v Reset Configuration Data
This option is used to set whether the system is permitted to automatically
distribute IRQ, DMA, and I/O addresses each time the machine is turned on.
v Resources Controlled by
Use this option to determine if IRQ resources are automatically assigned or
manually assigned
v IRQ Resources
Press to manually assign IRQ resources.
v PCI/VGA Pallette Snoop
If you use a non-standard VGA card, use this option to solve graphic accelera-
tion card or MPEG audio card problems (e.g. colors not accurately displayed).
v Maximum Payload Size
This option is ued to set maximum TLP payload size for PCI Express devices.
v Maximum ASPM
Enable/Disable Advance State Power Management
PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.com.cn