Foxconn C51XEM2AA-8EKRS2H User Manual
Page 75
Chapter 5 Directions for Bundled Software
68
1. Click Next to go to the following screen:
Figure 2. MediaShield Select-Configuration Screen
Note: You will only see this screen if you have less than 4 free disks in the
system. If there are 4 or more free disks available, you will proceed to directly
to custom setup.
Selecting the “Protection” option will automatically configure the best RAID
option based on the number of drives and with the criteria that if a drive fails
you will not lose your data.
Selecting the “Capacity”option will automatically configure the best RAID
option based on the number of drives and the desire for maximum capacity.
This array will NOT be fault-tolerant, so choose this option only if your data is
non-critical or is being backed up.
Select the “Custom” option to create a custom RAID array that can be a:
v
Striped Array
v
Mirrored Array
v
Stripe Mirrored Array
v
Spanning Array
v
RAID 5 Array
To set up a Striped Array, select “Striping” as RAID Mode and leave “Stripe
Size” with its default value, as shown in Figure 3.
PDF 文件使用 "pdfFactory" 试用版本创建