Foxconn C51XEM2AA-8EKRS2H - Manual (Page 18)

Chapter 2 Installation Instructions
11
CPU
This motherboard supports AMD Socket AM2 Athlon TM 64 X2 Dual-Core, Athlon TM
64 FX, Athlon TM 64 and Sempron TM processor with Hyper-Transport Technology.
1. Unlock the socket by pressing the le-
ver sideways, then lift it up to a 90 o
angle.
2. Align the cut edge to the gap in the
base of the socket. Carefully insert the
CPU into the socket until it fits in place.
3. W hen the CPU is in place, press it
firmly on the socket while you push
down the socket lever to secure the
CPU. The lever clicks on the side tab
to indicate that it is locked.
Installation of CPU
Follow these steps to install the CPU.
Push down the socket
lever to secure the CPU.
Cut edge
Attention:
The CPU pins must be properly aligned with the holes in the
socket, otherwise the CPU may be damaged.
For the detailed CPU vendor list qualified on this motherboard, please visit
the website:
http://www.foxconnchannel.com
90 o
Gap in the base
PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.com.cn