Formax FD 280 - Manual (Page 37)

33
10. Tab fold is
uneven.
Head position needs
adjustment.
With 1 inch tabs, the
tabs are not centered
Adjust head position.
Refer to Section
9.2.2.
Make sure that the
tab strip is between
the hinged guides on
the peel bar.
Tab Size Wrong Power Off, select tab
size
11. Leading edge of
mail piece tears
at the tab.
Head position needs
adjustment.
Mail pieces are poorly
folded.
Mail pieces are too
thin.
Spread the heads
apart slightly.
If tenting is too great,
move heads closer
together slightly.
12. Mail pieces jam
upon entering FD
280.
Input Guides are too
close together
Spread guides.
Input device and
tabber are misaligned.
Correct alignment is
critical. Carefully
position the input
device for correct
feeding and
transport.
Feeding device is too
fast.
Reduce speed of
feeding device until
tabs are being
applied correctly.
Skew at the feeder. Pieces MUST feed
straight to tab
straight. Consult
feeder manual to
eliminate skew at the
output of the feeder.