Formax FD 280 - Manual (Page 18)

14
4.3 Control Panel
Figure 4.3 - FD 280 Control Panel
4.3.1 Power Indicator
The orange Power Indicator light illuminates when the
power switch is turned on.
4.3.2 Stop
The STOP (red pushbutton mushroom) Switch
interrupts the movement of all moving parts and
resets the microprocessor. Once the STOP button
has been pressed, it must be lifted up into the run
position. Lifting the button will not start the machine.
Press the STOP switch to change tab mode settings.
4.3.3 Start
The Start button is a momentary switch that causes
the resumption of movement after the Stop Switch
has been pressed.
4.3.4 Tab Ready
Then green Tab Ready light illuminates when enough
(usually 3-4) pieces have been fed regularly through
the machine to allow precise and regular tabbing. If
the Tab Ready light stays unlit, there is a problem
with the feed mechanism as pieces are not being
counted well.