Formax FD 3200 - Manual (Page 68)

3-31
Chapt er 3 Advanced Operation
7-12. Default setting
The setting contents such as speed or double-feed detection can be changed when [Normal] is set in the
[Oper Mode] setting.
Other Setting1/5
Feed Interval
Stack Roll Adj
Belt Convey Vol
1
Press the menu key to display [Other
Setting].
Other Setting3/5
Alarm Setting
Detect OFF
Default Setting
2
Select [Default Setting] with the or
key.
Default setting
5 Speed
D-Feed OFF
3
Press the key.
The [Default Setting] screen is displayed.
4
Select [Speed] with the key or key.
5
Press the key.
At this stage the numerical value can be
changed.
Default setting
3 Speed
D-Feed OFF
6
Input numerical values on the keypad
or with the or key.
Setting range : 0 to 6
Default setting
3 Speed
D-Feed OFF
7
Press the key.
The selected value is set.
8
Select [D-Feed] with the key or key.
9
Press the key.
At this stage [D-Feed] can be changed to [ON]
or [OFF].
10
Select [ON] or [OFF] with the key or key.
Default setting
3 Speed
D-Feed ON
11
Press the key.
The selected item is set.