Formax FD 3200 - Manual (Page 30)

2-5
Chapt er 2 Basic Operation
3. Standard Folding of Standard Paper
Method to fold standard paper by setting a mode among standard folding modes displayed on the control
panel.
For the standard paper sizes, refer to Chapter 1 “5. Paper Types and Sizes” (p.1-12).
Six standard fold
s are available as shown below.
Paper feed direction
Ejection
direction
Single
fold Double
fold Irregular
accordion fold-out Letter
fold Accordion-
fold Gate fold
Depending on the thickness of paper, this machine may not be able to process some standard sheets of
paper.
Do not put fingers inside during operation.
Keep away long hair, ties, jewelry and loose clothing.
It could cause injury.
Automatic detection of standard paper size
When paper for all paper sizes is stacked in the
machine direction shown in the igure, paper
is detected as standard paper.
When standard pap er is
stacked on the paper feed tray
sideways, the paper size is detected as
wrong paper size. Use paper as non-
standard paper when stacking paper
sideways.
For the use of non-standard paper, refer
to Chapter 3 “2. Standard Folding of Non-
Standard Paper” (p.3-7).