Formax FD 3200 - Manual (Page 17)

1-8
Chapt er1 Before Operation
4. Screen Descriptions
4-1. Top screen
The top screen is a screen displayed irst when you turn on the power.
LTR +0.0/+0.0
Ready
0
[1]
[2]
[3] [4]
[5]
[6]
No. Information displayed Details
[1] Paper size Displays the detected paper size.
[A3][A4][A5][B4][B5][B6]/
[LGR][LGL][LTR][INV][STMT]
The following will be displayed when custom folding is set.(*: Memory number)
[IR *]
Set values are displayed when paper size is manually set.
If paper size is not displayed, the paper size is not detected and folding cannot
be started.
[2] Machine status Displays the current status of the machine.
[3] Special function setting
display Displays the settings of each special function.
Double-feed detection is set.
(State where the test folding is not performed)
Double-feed detection is set.
(State where the test folding is performed)
Double-feed detection is set.
(Double-feed detection is not performed because the paper length is 250
mm/9.84 inches or less.)
Interval function is set.
The refold mode is set.
The stopper ixation mode is set.
Counting up.
Counting down.
Paper ejection amount: [Large] is selected.
[4] Stopper correction Displays the adjustments of the fold plates 1 and 2.
The stopper position will be displayed when custom fold is set.
[5] Process Speed The processing speed which is set is displayed with an icon.
[6] Number of processed
sheets Displays the number of processed sheets.