Formax FD 3200 - Manual (Page 19)

1-10
Chapt er1 Before Operation
Item Details
Other Setting Oper Mode
(Operation Mode
Settings) [Normal] [Last Fold][Stopper Fixed] Default: [Normal]
Sets operations of folding stopper on the folding plates 1 and 2,
when the power is turned on.
[Normal] : Start up the machine in the normal setting state, when the
power is turned on.
[Last Fold] : Start up the machine with the same settings as the last
time it was used.
[Stopper Fixed] : Start up in the same conditions at all times.
Test Feed Set * : Settings (1 to 3) Default: [2]
Sets the number of sheets to perform test feeding.
Power Save
Set Set [ON][OFF] Default: [ON]
Sets the power saving mode to ON or OFF.
Time * : Settings (15 to 60) Sec Default: [30]
Alarm
Setting Set [ON][OFF] Default: [OFF]
Sets to the alarm (buzzer sound) setting when leaving the machine
unused.
Time * : Settings (5 to 120) Min Default: [60]
Detect OFF
(Detection
OFF Setting) Load
(Load
Paper) [ON][OFF] Default: [ON]
Sets the detection of paper stacked.
Default
setting Speed * : Settings (0 to 6) Default: [5]
Sets the value to be used when the power is turned on. Set to [0] for
folding thin paper mode.
D-Feed
(Double-
feed) [ON][OFF] Default: [OFF]
Idling [ON][OFF] Default: [OFF]
Sets to the idling setting depending on whether to use at the time of
occurrence of mis-feed or double-feed.
Tone [ON][OFF] Default: [ON]
Sets the buzzer to ON or OFF.
mm/inch Setting [mm][inch] Default: [mm]
Sets the unit to be displayed to [mm] or [inch].
Tray Desc Amt
(Paper Feed Tray
Descending Amount) [Not Descend][Small][Normal][Large] Default: [Large]
Sets how far the paper feed tray is lowered.