Formax FD 3200 - Manual (Page 61)

3-24
Chapt er 3 Advanced Operation
When sheets of paper processed the gate fold mode unfold and a sheet
processed later slips into the one processed before:
Depending on the type and size of paper,
the adjustable range in the gate fold mode is
limited. Be sure to decrease the setting values
one scale at a time in this mode and check the
results.
Other Setting1/5
Feed Interval
Stack Roll Adj
Belt Convey Vol
1
Press the menu key to display [Other Setting].
2
Select [Stack Roll Adj] with the or
key.
Stack Roll Adj
15
3
Press the key.
The [Stack Roll Adj] screen is displayed.
4
Press the key.
At this stage the numerical value can be
changed.
5
Select a numerical value on the keypad or with the key.
Selected range : [1] to[16]
As the numerical value decreases, the stacker roller position moves to the inner side of the machine, and
as the numerical value increases, the stacker roller position moves to the outer side of the machine.
Stack Roll Adj
10
6
Press the key.
The changed numerical value is set and the
stacker roller moves.
7
Press the key.
Returns to [Other Setting].
8
Press the key.
Returns to the top screen.
When the paper size or folding mode is changed, the former value is cleared.
When the paper size is changed according to the automatic detection of paper size, the value will not be
cleared.