Formax FD 3200 - Manual (Page 21)

1-12
Chapt er1 Before Operation
4-5. Classiication of buzzer sounds
In this machine the buzzer sounds in conirmation when setting on the control panel or paper runs out on
the paper feed tray, etc. Classiication of the sounds is as follows.
“pi”
: Operational sound at the time of normal key operation
“pipi” : Warning alarm at the time of mis-operation, mis-feed of paper, or paper empty
“pii” : At the start of folding operation or end of normal folding operation
In conirmation of change of various settings
“piipii” : An er
ror such as a paper jam
“piipiipii” : An er
ror, contact Formax service technician for assistance
5. Paper Types and Sizes
Paper type
Fine quality paper, Rough paper, Stencil paper, Recycle paper : 52.3 to 157 g/m 2 /14 to 40 lb
Art paper, Coated paper : 73.3 to 157 g/m 2 /19 to 40 lb
Paper size
Standard paper (The standard paper can be used only when it is stacked in the machine direction.)
Paper
size
W × L
(mm)
Paper
size
W × L
(mm)
Paper
size
W × L
(inches)
A3 297 x420 B4 257 x 364 LGR 11 x 17
A4 210 x 297 B5 182 x 257 LGL 8.5 x 14.0
A5 148 x 210 B6 128 x 182 LTR 8.5 x 11.0
INV 7 x 8.5
STMT 5.5 x 8.5
Paper feed
direction Paper
Length : 182 to 457.2/
7.17 to 18.00
Width : 120 to 311/
4.73 to 12.24
Unit : mm/inches
Non-standard paper
Width : 120 to 311 mm/4.73 to 12.24 inches
Length : 182 to 457.2 mm/7.17 to 18.00 inches
* The aspect ratio for non-standard paper is
1:1 to 2.2:1.
Some limitations in setting and paper quality
may be applied depending on paper size.
Paper that cannot be used with this machine
• Paper out of speciications
• Curled paper
• Wavy paper