Formax FD 3200 - Manual (Page 18)

1-9
Chapt er1 Before Operation
4-2. Menu list
The function menu is displayed if you press the menu key with the top screen displayed.
Press the menu key to change setting windows.
The function screen can be switched with the key or key.
Determine the selected item with the
key.
Set Auto
Paper Size Set
P Length 457.0
The following menu items are provided with this machine.
Item Details
Air Adjust Sep. Air (Separating Air) * : Settings (20 to 99 )
The side fan air amount is displayed only when attaching the
optional products.
Pickup Air
Paper Size Set Set [Auto][Man] Default: [Auto]
Sets automatic detection of paper size or manual input of paper size.
P Length (Paper Le
ngth)
* : Settings (182 to 457.2 mm/7.17 to 18 inches)
Irreg Set
(Registration for
irregular folding) P Length * : S ettings (182 to 457.2 mm/7.17 to 18 inches)
Fold1 * : Settings (42.0 to 325.0 mm/1.65 to 12.80 inches)
Adjusts the stopper position of the folding plate 1. There is a limit to
the settings according to the length of paper used.
Fold2 * : Settings (0 or 47.0 to 217.0 mm/0 or 1.85 to 8.54 inches)
Adjusts the stopper position of the folding plate 2. There is a limit to
the settings according to the length of paper used and the position
of folding plate 1 stopper.
Interval Setting Set [ON][OFF] Default: [OFF]
Select ON to use interval function.
No of Sec
(The Number of
Seconds) [3][5][10] Default: [5]
Sets the number of seconds to be interrupted during folding
operation.
No of Sht
(The Number of Sheets) * : Settings (1 to 999) Default: [1]
Sets the number of sheets to be suspended during folding operation.
D-Feed Detect
(Double Feed
Detection Setting) Set [ON][OFF] Default: [OFF]
Select ON to detect double-feed.
Thickness [Thin][Thick] Default: [Thin]
Select the thickness of paper for which double-feed is detected.
Other Setting Feed Interval
(Paper feed interval
setting) [Slow][Normal][Fast] Default: [Normal]
Sets the paper feed timing.
Stack Roll Adj
(Stacker Roller
Adjustment) * : Settings (1 to 16)
Adjusts the position of the stacker roller.
Belt Convey Vol
(Ejecting Belt
Conveyance Volume) [Large][Normal] Default: [Normal]
Sets the paper ejection conveyance amount.