Formax FD 3200 - Manual (Page 62)

3-25
Chapt er 3 Advanced Operation
7-6. Setting ejection conveyance amount
Set the
output tray amount to [Large] if double folded thick paper tends to unfold on output, stack
unevenly, or jam at the paper
output section.
Other Setting1/5
Feed Interval
Stack Roll Adj
Belt Convey Vol
1
Press the menu key to display [Other
Setting].
2
Select [Belt Convey Vol] with the or
key.
Belt Convey Vol
Normal
3
Press the key.
The [Belt Convey Vol] screen is displayed.
4
Press the key.
At this stage the
output amount
can be changed to [Normal] or [Large].
5
[Large] Use the or key to select [Large].
Belt Convey Vol
Large
6
Press the key.
The selected item is set.
7
Press the key.
Returns to [Other Setting].
8
Press the key.
Returns to the top screen.
[Belt Convey Vol] is not reset until the power is turned of. However, it returns to [Normal] only when
the folding mode is changed from custom folding to standard folding.
[Belt Convey Vol] returns to [Normal] by turning of the power with [Oper Mode] set to [Normal].
However, it will start up with the setting contents changed in the [Last Fold] or [Stopper Fixed] even if
the power is turned of.