Formax 2200 Series - Manual (Page 95)

Operator's Manua l 2200 Series Operation and Trial Folds
1 6 . OPERATION AND TRIAL FOLDS
Afte r all adjustments have been completed for a particular job, check the result
by making a few trial folds.
!
Exercise caution in the vicinity of rotating shafts and rollers!
Hair, loose garments and jewelery may get caught!
SERIOUS INJURY MAY RESULT!
!
Exercise caution when running the machine with safety covers open
and fold plates removed! Do not get close to the rotating fold rollers!
SERIOUS INJURY MAY RESULT!
!
When making or breaking any electrical connection, always first turn
off the main switch or the safety switch on the folder. Non-compliance
may cause damage to electronic components!
! Exercise caution at the delivery end of the fold unit! Do not get close to
the rotating delivery shafts! SERIOUS INJURY MAY RESULT!
The operating sequence is as follows:
C
5
5
5
Place paper on the feed table.
Press key C or switch on main switch.
Set the sheet gap in the delivery section to the medium position by
turning this knob.
Set the folding speed to the medium position by turning this knob.
Set the sheet gap on the register table to the medium position
by turning this knob.
Switch on the pump by touching this key.
Switch on the main motor by touching this key.
Activate sheet feed by touching this key:
Brief touch: Single sheet
Touching key for approx. 2 sec.: Continuous feed
95