Formax 2200 Series - Manual (Page 51)

Operator's Manual 2200 Series Automatic Setting
F1 F5 F2 F3 F4
TOTAL: JOB NO:
OUTPUT:
REMAINDER:
MONITORING:
DOUBLES:
TRANSPORT: ON
ON
00000
0000
0000
00000000
/h
MONITORING SAVING
COUNTER SET-UP JOB
Main Menu SET-UP
Special Folds
1. Press key C The BASIC menu is displayed.
2. Press key F3 The SET-UP menu is displayed.
F1 F5 F2
F6
F7
F4
SET-UP
SELECT WITH FUNCTION KEYS
JOB SAVED
--------- FOLD ------------
ROLLER
GAP DELI-
VERY
SPECIAL STANDARD
Special Folds This kind of set-up resembles most the principle used in conventional folding machi-
nes because the fold length of each stop must be calculated or measured before setting.
The actual setting, however, is done at the operator panel.
To enter the measurements for the fold lengths, e.g. to set the fold plate stops,
the menu
SET-UP must be called up via key F3 .
SUCTION LENGTH
51