Formax 2200 Series - Manual (Page 9)

Regular and proper cleaning contributes to a long life of the machine and a consistent quality.
Therefore it is important to clean the machine in regular intervals and above all to remove paper
dust.
The interval between maintenance jobs depends on the workload.
It is recommended to clean the machine once a week.
Before cleaning the machine always pull the power plug!
Use the Formax recommended cleaner only for cleaning the fold rollers.
Do not use any solvents such as Acetone or Toluol. They would damage the nonmetal parts
of the rollers.
Remove paper- or print powder dust from all fi xed and moveable parts of the machine.
Clean the photodetector with a brush.
Use compressed air to clean the fold plates when paper with a high degree of powder
has been folded. Carefully remove deposits in the control box with a vacuum cleaner.
Clean the air fi lter of the compressor and the pump using brushes or air.
The maintenance-free fl at belt drive needs no lubrication of any kind.
Sealer rollers should be cleaned weekly with Formax recommended cleaner to avoid toner build
up.
4.3 Cleaning and Maintenance
Operator's Manu al 2200 Series General
9