Formax 2200 Series - Manual (Page 92)

Operator's Manua l 2200 Series Automatic Setting
Menu Service
1. Press key F12 The SERVICE menu is displayed.
Service Functions The service menu can be called up by pressing key F12 .
It is primarily used by the service technician.
SERVICE
CODE: 0000
AFTER ENTERIN G VALUE :
2. Press key F3
F1 F5 F2 F3
F6
F7
F4
SERVICE
SUM: 0000001111
BASIC SETTING PAPER SENSOR:
CLEAR
DATA SYSTEM
CONFIG
TEST
OPTIONAL EQUIPMENT:
PROG
VERS
Data ( F1 ) can only be erased by a service technician, this is why a special code
number is needed.
By pressing key F5 , information about shingling, speed, gap, etc. can be shown in the
display.
Pressing key
F4 will show the program version.
By pressing key F3 , a menu is called up where machine configurations can be
changed. This is necessary if, for instance, the folder is equipped with a different
feeder or a second fold unit.
To prevent accidentally
changing the machine
configuration, a code
number must be entered
here. This code number
is
4250 .
3. Enter the code number 4250
SERVICE
CODE: 4250
AFTER ENTERIN G VALUE :
92