Formax 2200 Series - Manual (Page 79)

Operator's Manua l 2200 Series Automatic Setting
Correction of Fold Lengths - Menu FOLD LENGTH
Menu FOLD LENGTH
1. Press key The FOLD LENGTH menu is displayed.
F1 F5 F2 F3 F4
1
FOLD LENGTH ( in )
FOLD UNIT: PLATE: 1
ACT : 8.5 NOM:
CORRECT WITH +/-
UNIT PLATE - + SET-UP
In this menu, all necessary corrections of the fold lengths of a set-up job can be made.
Key F1 will switch from the first to the second fold unit and vice versa.
Key F2 will display the fold lengths of all fold plates.
Key F3 will reduce the fold length in steps of 0.25 mm.
Key F4 will increase the fold length in steps of 0.25 mm.
Key F5 is inactive, because every correction is immediately transferred to each stop.
Every change of 0.5 mm is displayed.
2. Press key C Back to BASIC menu.
79