Formax 2200 Series - Manual (Page 80)

Operator's Manua l 2200 Series Automatic Setting
Setting the Fold Rollers - Menu ROLLER GAP
Menu Roller Gap
1. Press key C The BASIC menu is displayed.
F1 F5 F2 F3 F4
TOTAL: JOB NO:
OUTPUT:
REMAINDER:
MONITORING:
DOUBLES:
TRANSPORT: ON
ON
00000
0000
0000
00000000
/h
MONITORING SAVING
COUNTER SET-UP JOB
1
1
The fold rollers are set on the basis of information
from the computer control.
The correct gap is calculated taking into account
the selected type of fold and the paper weight
and is then shown on the display.
This setting value must be transferred to the left
and right setting knobs (1) associated with each
fold roller.
Before setting the fold rollers the fold lengths in all fold plates must already
be set.
2. Press key F3 The SET-UP menu is displayed.
F1 F5 F2
F6
F7
F4
SET-UP
SELECT WITH FUNCTION KEYS
JOB SAVED
--------- FOLD ------------ ROLLER
GAP DELI-
VERY
SPECIAL STANDARD
SUCTION LENGTH
80