Formax 2200 Series - Manual (Page 12)

Operator’s Manual 2200 Series
7. ELECTRICAL CONNECTION
Operator panel, fold units and delivery are interconnected with cables.
Plugs and sockets allow variable connections.
Do not bend or twist the cables sharply or place heavy objects on them -
they may get damaged!
When making or breaking any electrical connection, always fi rst turn
off the main switch or the safety switch on the folder. Non-compliance
may cause damage to electronic components!
At the rear of the base of the fold unit you will fi nd the sockets for connecting
the various componets of the machine.
Buckle fold unit 1
1 Socket for the connection cable to the
operator panel
2 Receptical for Sealer unit
3 Receptical for Sealer unit
4 Socket for the connection cable of the
stacker table
5 Reset switch
6 Power cord 400V
7 Connection cable of the feeder
8 Connection cable of the pump
9 Sealer Photo-eye
Plug connections are easily pulled or inserted by holding the plug with one
hand and opening resp. closing the safety bracket with the other hand.
9
3 2 4 5
6 7 8
1
1 2